Electrical Safety Inspection

Electrical Safety Inspection: Importance and Checklist

No one hesitates to call an electrician whenever a fault is seen. However, most people will take their electrical wiring safety for granted.

Importance of Home Electrical Safety Inspection

All electrical installations/wiring will deteriorate with age and use. However, most home owners often overlook the wiring condition. At the most, an  will only be called when a breaker has already been tripped or a fuse has already been blown. It is not surprising that an electrical fault is a common cause for house fires.

electrical safety inspection

Having your electrical wiring inspected is one of the most important things to keep your home safe from electrical hazards. You don't want to risk the lives of your loved ones, nor getting your property damaged due to electrical fires. Therefore, electrical safety should be a top priority in your home.

A proper electrical safety inspection will:

• Identify electrical wiring and components that may have degraded over time.
• Reveal if any electrical circuits are overloaded.
• Reveal if any lack of earthing.
• Identify any defective wiring or other mistakes made by non-certified electricians or DIY home-owners.
• Spot oversized fuses or breakers that may cause an electrical fire hazard.
• Find any potential electric shock risks.

When To Do Home Electrical Safety Inspection?

• When purchasing a home. It is better to ensure that your new home is electrically safe before moving in.
• If your home is more than 25 years old and has not had an electrical inspection.
• If you have had a major renovation to your home.
• If you observe an electrical appliance that is operating erratically, especially if it is much older.

Periodic safety checks are also important and should be carried out every 10 years or while adding a new appliance.

Home Electrical Safety Inspection Checklist

• All light fixtures, sockets, switches are in good condition and working.
• All wires are in good condition without any signs of deterioration, wear and tear.
• All circuit breakers, RCDs etc. are operating properly and fuse elements are appropriately installed.
• Suitability of all switchgear (MCBs, RCDs etc.).
• Proper grouping and labelling inside the distribution panel.
• Earthing/grounding system is proper.
• Wiring method is up to date to ensure that it is suitable for current use.
• All wires of a circuit are grouped together.
• Proper insulation of electrical system near wet and damp locations.
• Wires or sockets are not being overloaded.
• Reducing the necessity of extension cords by adding permanent fittings if required.

This is a general checklist while inspecting a home electrical system. However, a certified professional electrician will inspect thoroughly to ensure the safety. It is important to call only a licensed electrician for safety inspection or for any major electrical work. You may be able to easily find a licensed electrician in your local area by searching on the internet. For example, these electricians in Perth provide electrical safety inspection and recommend you what can be done based on their inspection.

Electrical safety inspection is must for every household to ensure safety from electrical hazards. Worrying about electrical inspection costs? Well, you may actually save more by preventing repair costs by calling an electrician after a fault has occurred. And it's not just about costs, it could be about lives.